Studio Brennprobleme

  1. INSTALLIERE DEN AKTUELLEN PATCH:

 

hier finden sie die aktuellsten Versionen von Studio 10-14

Hinweis: Studio 11 Updates sind nur für Studio 11 geeignet, Studio 10 Updates sind nur für Studio 10 geeignet, usw.


Wenn Sie eine ältere Version von Studio haben (Studio 9 or 10, etc), wird empfohlen auf die aktuelle Studio Software zu wechseln. Die aktuelle Version ist Studio 14. Hier Klicken um zum Shop zu wechseln.

 

Anleitung zum Herunterladen und Installieren eines Updates:

  • Merken Sie sich beim Herunterladen den Speicherort; wir empfehlen auf dem Desktop zu speichern.
  • Beenden Sie alle anderen Programme, inkl. Studio, bevor Sie das Update installieren.
  • Nach dem Herunterladen: Doppelklicken Sie bitte auf die Update Datei, um die Installation zu beginnen.
  • Folgen Sie den Anweisungen auf dem Bildschirm, um die Installation zu vervollständigen. Führen Sie nach der Installation einen Neustart des Computers durch.

 

 

 

  1. DISK EINSTELLUNGE ÄNDERN, SICHERHEITSMODUS OPTION: In Studio, click auf Setup -> Disc erstellen. Klicke auf Einstellungen, wähle "Sicherheitsmodus: Erzeuge Image und danach brennen" indem sie auf den Radiobutton klicken davor und klicken sie auf OK. Wenn es geholfen hat, wählen sie ommer diese Option.

 

  1. STUDIO NEUSTARTEN: Shut down Studio, then relaunch it. Try to create the DVD again using the safe mode setting above.

 

  1. COMPUTER NEUSTARTEN: Try opening the door of the DVD burner. If it won't open, then shut down Studio, then restart the computer. Launch Studio and try to create the DVD again using the safe mode setting.

 

  1. MEDIA:

 

• LEERES MEDIUM IM LAUFWERK: Make sure that there is a blank, write-once media or rewriteable media in the DVD burner.

• DVD TYP: Make sure that your DVD burner supports the media you use. As for any problem with burning a DVD, we recommend customer use rewriteable media to reduce the number of wasted DVDs when they have to troubleshoot a failure while burning DVDs. In this case, if you have only used rewriteable media, (RW) we would also recommend trying to use a write once (-/+ R) DVD and erasing the RW media.

• DVD MARKE: Pinnacle recommends using a name brand of DVD, i.e. Sony, Apple, Memorex, etc. Also we recommend trying a DVD from a different manufacturer to see if the problem is related to the brand of DVD that is being used.

NOTE: Check with the following site to find information on the media being used.

http://www.videohelp.com/dvdmedia

 

  1. LANGSAME SCHREIBGESCHWINDIKEIT: In the Make Disc settings try lowering the Write Speed to the lowest possible setting.

 

  1. DIE NEUSTE FIRMWARE LADEN: Ensure that the DVD burner being used has the latest firmware update from the burner manufacturer.

 

  1. ÜBERPRÜFEN DER BRENNGESCHWINDIGKEIT: Make sure that the disc media speed (printed on the media or on the media box) is compatible with the DVD burner. Some burners may not work with media that has a higher maximum supported burn speed. For example, if the burner being used supports 4x disc media, do not use 16x disc media.

 

  1. LÖSCHEN DER TEMPORÄREN DATEIEN: Try deleting the Auxiliary Files for the current project. To do this, go to File -> Delete Auxiliary Files and select "Delete auxiliary files for current project." Press OK and try to re-render and burn the project.

 

  1. IMMER NEU CODIEREN: Go to the Make Disc settings and check the box called "Always re-encode entire movie".

 

  1. SICHERHEITSMODUS: Try burning with the safe mode option selected. To do this, go to the Make Disc settings. In the Burn options are select the option called: "Safe mode: create disc content and then burn."

 

  1. EIN DISCIMAGE ERSTELLEN: In Studio, click on Setup -> Make Disc. Under the box marked Burn Options, select "Create disc content but don't burn" by clicking on the radio button in front of the setting and then click OK. Then click the Create disc button in the Make Movie section to begin the image creation process.

    If the image is not created, it is likely that the problem is a Render problem rather than a burn problem. Click Here to see the FAQ on Render problems.

    If the disc image file is created successfully, burn the disc from the new disc image by selecting "Burn from previously created disc content" in Burn Options.